Conference Paper

1. "The effect of the water drop coefficient on the ice geometry formed on the cylinder"
   Mojtaba Tahani, faraz fotouhi, Shiva Rezaei, ghazal Esmaili
   International Conference on Environmental Engineering and Renewable Energy (ICENVERE - 23), 2023
2. "Power forecasting and parametric study of icing effects on horizontal axis wind turbine"
   Mojtaba Tahani, Jiarong Hong, mohammadali fallahian, Amirhossein Hossein, faraz fotouhi, mahdieh panahi bakhsh, Shiva Rezaei
   International Conference on Environmental Engineering and Renewable Energy (ICENVERE - 23), 2023
3. "Design of Savonius wind turbine with discharge flow directing capability; Part B: Parametric Analysis Approach using AHP"
   Mojtaba Tahani, ali rabbani, Hjklkl Hgff, Saeede Mirmahdian, mohammad ali bakhtiarian
   8th Iran Wind Energy Conference, 2022
4. "Energy Assessment and Design of Wind-Solar Hybrid System as a Green Land Element in Yazd City"
   Mojtaba Tahani, [] [], mohammad ali bakhtiarian, Saeede Mirmahdian, Hjklkl Hgff
   8th Iran Wind Energy Conference, 2022
5. "Analysis of Wake Flow Structure around the Horizontal Axis Wind Turbines under Ground Effects"
   Mojtaba Tahani, mahsa gholami, Hjklkl Hgff, Shiva Rezaei
   8th Iran Wind Energy Conference, 2022
6. "Numerical Simulation of Vertical Axis Wind Turbine Performance Using Sliding Mesh Method"
   Mojtaba Tahani, Amirhossein Hossein, Saeid Heidarian, AMIN JAVANMARD, Amir Mohammad Mohammadi, SHIVA REZAEI, Mojtaba Mirhosseini, علیرضا صادقی, Seyed Alireza Rasouli, Mohammad Saeed Kashef, Amir Jalali
   8th International Wind Energy Conference, 2022
7. "Power Augmentation and Optimization of Gas Turbine performance by Inlet Fogging and Wet Compression Analysis Algorithm"
   Mojtaba Tahani, Mehran Masdari, Hamidreza Eivazi, Mirhamed Salehi
   The 11th International Exergy, Energy and Environment Symposium (IEEES-11), 2019
8. "Energy Management and Optimization of Solar-Vapor Compression Desiccant Wheel Cooling System"
   Mojtaba Tahani, Foroogh Mohandses Pour, Saeedeh Mirmahdiyan
   The 11th International Exergy, Energy and Environment Symposium (IEEES-11), 2019
9. "Investigating the effect of the type and diameter of volute on the efficiency of centrifugal reverse pump at different operating conditions"
   Mojtaba Tahani, Hossein Yousefi Sahzabi, Roshanak Fahimi, Miyagawa Kazuyoshi, Majid Najafpour, سلمان صارمیان
   29th IAHR Symposium on Hydraulic Machinery and Systems, 2018
10. "Optimization of Marine Current Turbines, Using Meta Heuristic Algorithms, 29th IAHR Symposium on Hydraulic Machinery and Systems"
    Mojtaba Tahani, Narek Babayan, Roshanak Fahimi, Kazuyoshi Miyagawa, Sima Adimi, S Adimi3
    29th IAHR Symposium on Hydraulic Machinery and Systems, 2018
11. "Characteristics and Internal Flow of a Low Specific Speed Pump used as a Turbine"
    Zhl Liu, T Yukawa, Kazuyoshi Miyagawa, Roshanak Fahimi, Mojtaba Tahani
    29th IAHR Symposium on Hydraulic Machinery and Systems, 2018
12. "Investigation on Vapor Compression Cooling System Design Parameters and performance"
    Mojtaba Tahani, Foroogh Mohandses Pour, Narek Babayan
    10th International Exergy, Energy and Environment Symposium, 2018
13. "Investigation on Hydro turbines performance in The Small Hydro Power Plants"
    Mojtaba Tahani, Foroogh Mohandses Pour
    10th International Exergy, Energy and Environment Symposium, 2018
14. "Design and Analysis of a Diffuser Augment Horizontal Axis Tidal Turbine"
    Mojtaba Tahani, Mohammad Javad Ziabakhsh Ganji
    6th International conference on research in engineering, 2017
15. "Analysis of Ducted Wind Turbine using Surface Vorticity Method"
    Mojtaba Tahani, Mohammad Fereidun Nejad, Vahid Esfahanian
    3rd international conference of IEA, 2017
16. "Performance Evaluation of the Solar Desiccant wheel Cooling System, Case Study: Iran"
    Mojtaba Tahani, Foroogh Mohandses Pour, Narek Babayan, Mohammad Ali Fallahian, Morteza Tahani
    9th International Exergy, Energy and Environment Symposium, 2017
17. "Desiccant Wheel Design by Using Metaheuristic Approach"
    Mojtaba Tahani, Foroogh Mohandses Pour, Narek Babayan, Sadegh Tavakoli Bina, Saeedeh Mirmahdiyan
    9th International Exergy, Energy and Environment Symposium, 2017
18. "Metaheuristic Technique for Section Selection across the Horizontal Axis Turbines"
    Mojtaba Tahani, Kasuyoshi Miyagawa, Narek Babayan, Roshanak Fahimi, Foroogh Mohandses Pour
    9th International Exergy, Energy and Environment Symposium, 2017
19. "Performance Investigation of Different Desiccant Cooling Cycles"
    Mojtaba Tahani, سعید امانی , Arash Ghalami, Narek Babayan, Foroogh Mohandses Pour
    11th International Energy Conference, 2016
20. "Identification of the most suitable desiccant cooling cycle for Iran"
    Mojtaba Tahani, Narek Babayan, Foroogh Mohandses Pour
    8th International Exergy, Energy and Environment Symposium (IEEES8-2016), 2016
21. "Horizontal Axis Tidal Current Turbines Analysis and Optimization Tools"
    Mojtaba Tahani, Fatemeh Razi Astaraei, Narek Babayan, Hossein Yousefi Sahzabi, Roshanak Fahimi
    Energy and Environment Symposium (IEEES8-2016), 2016
22. "Design Optimization of Marine Current Turbines Using Krill Herd Algorithm"
    Mojtaba Tahani, Narek Babayan
    8th International Exergy, Energy and Environment Symposium (IEEES8-2016), 2016
23. "Effect of blade inlet angle on the performance of oil centrifugal pump"
    Mojtaba Tahani, Vahid Pourheidari
    24th Annual International Conference on Mechanical Engineering (ISME 2016), 2016
24. "Numerical study of incompressible viscous and turbulent flow through the centrifugal pump"
    Mojtaba Tahani, Vahid Pourheidari
    3rd National and First International Conference in applied research on Electrical, 2016
25. "Effect of blade trailing edge profile on performance of the centrifugal pump that conveys oil"
    Mojtaba Tahani, Vahid Pourheidari
    3rd National and First International Conference in applied research on Electrical, Mechanical and Mechatronics Engineering, 2016
26. "Increasing the Produced Power of Building Mounted Wind Turbines by Optimization of Roof Geometry and Utilization of Solar Panels"
    Mojtaba Tahani, Narek Babayan, Arman Pouaee, Hjklkl Hgff, Ahmad Sedaghat
    2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART), 2015
27. "Vibrational Simulation of Offshore Floating Wind Turbine and its Directional Movement Control by Fuzzy Logic"
    Mojtaba Tahani, Emad Ziaei, Ahmad Hajinezhad, Hjklkl Hgff, Ahmad Sedaghat
    International Conference on Sustainable Mobility. Applications, Renewables and Technology. (SMART2015), 2015
28. "Multi Objective optimization of standalone PV/Battery and Pv/Wind/Battery system for a building in Tehran"
    Mojtaba Tahani, Narek Babayan, Arman Pouaee, Roshanak Fahimi
    2nd International Conference and Exhibition on Solar Energy (ICESE)2015, 2015
29. "Study of Numerical Modeling of Unsteady Transonic Flowfield around an Airfoil under Pitching Motion"
    Mojtaba Tahani, Mehran Masdari, Mohamad Reza Eivazi, Masoud Tatar
    2nd International Conference on Electrical, Mechanical, Computer and Mechatronics Engineering-ICE2015, 2015
30. "Exergy Analysis of a Hybrid System Including a Solar Panel, Fuel Cell and Absorption Chiller"
    Pouria Ahmadi, Mojtaba Tahani, Noushin Enadi, Keyvan Keramati
    7th International Exergy, Energy and Environment Symposium, 2015
31. "Aerodynamic and Energy Analysis of an Industrial Wind Turbine"
    Mojtaba Tahani, Mohsen Moradi
    7 International Exergy, Energy and Environment Symposium (IEEES7-2015), 2015
32. "The effect of air with supplementary oxygen on power and fuel consumption of spark-ignition engine"
    Mojtaba Tahani, Mohammad Hossein Ahmadi, Keyvan Keramati
    7th International Exergy, Energy and Environment Symposium, 2015
33. "Aerodynamic Investigation of a Horizontal Axis Wind Turbine Using CFD and Modified BEM Methods"
    Mojtaba Tahani, Mohsen Moradi
    7th International Exergy, Energy and Environment Symposium (IEEES7-2015), 2015
34. "3D Numerical Investigation of Ignition Timing Effects on the SI Engine exergy"
    Mohammad Hassan Shojaefard, Keyvan Keramati, Mojtaba Tahani, Alireza Veissi
    7 International Exergy, Energy and Environment Symposium (IEEES7-2015), 2015
35. "Energy auditing and feasibility study of utilization the optimized solar energy converters, Case Study: A building in Tehran"
    Mojtaba Tahani, Narek Babayan, Orbel Barkhordarian, Eric Matevosian, Minehli Petrosian, Derick Geregorgian
    4ed Conference on Emerging Trends in Energy Conservation, 2015
36. "Numerical Investigation of Airflow around a Horizontal Axis Wind Turbine"
    Mojtaba Tahani, Mohsen Moradi
    13th International Conference on Clean Energy (ICCE-2014), 2014
37. "Vibration Investigation of cylindrical shell reinforced by carbon nanotubes on an elastic foundation"
    M.mehdi Najafizadeh, Saeedeh Mirmahdiyan, Mohammad Hossein Sabour, Mojtaba Tahani
    4th International Conference on Nanotechnology, 2013
38. "Drag reduction in hypersonic flows with aerospike and aerodisk Technology"
    Mojtaba Tahani, Mohammad Sadegh Karimi, Mohammadjavad Khodaee, Mohammad Nankali
    21st Annual International Conference on Mechanical Engineering-ISME2013, 2013
39. "Numerical Study on Mixed Convection in an Enclosure Filled with Nanofluid"
    Mohammad Hossein Sabour, Mojtaba Tahani, Mohammad Mehdi Ghasemi, Mohammad Hasan Shojaee Fard
    3rd International Conference on Nanotechnology: Fundamentals and Applications, 2012
40. "Numerical investigation on the aerodynamics characteristics of a WIG craft airfoil with different turbulence models"
    Mohammad Hossein Roozbahani, محمدحسن شجاعی فرد, Mojtaba Tahani
    AERO2011, 2011
41. "Numerical solution turbulent flow over backward facing step - the effects of step height, duct angle"
    محمدحسن شجاعی فرد, Mojtaba Tahani, Mohammad Sadegh Abednejad
    19th Annual Conference on Mechanical Engineering-ISME2011, 2011
42. "Development of the experimental equation for the centrifugal pump efficiency reduction when handling viscous fluid"
    محمدحسن شجاعی فرد, Mojtaba Tahani, Hadi Fallah, Mehdi Beglari
    19th Annual Conference on Mechanical Engineering-ISME2011, 2011
43. "Numerical Study of Methane-Air Mixture Combustion in a Burner"
    Mojtaba Tahani, محمدحسن شجاعی فرد, Parviz Asadollahzade
    19th Annual Conference on Mechanical Engineering-ISME2011, 2011
44. "Impeller Geometry Effects on Performance of Centrifugal Pump for Handling Viscous Fluids"
    Mojtaba Tahani, محمدحسن شجاعی فرد, Hadi Fallah, Mehdi Beglari
    19th Annual Conference on Mechanical Engineering-ISME2011, 2011
45. "Waste Heat Recovery from an Internal Combustion Engine (ICE) Using Two-Stage Organic Rankine Cycle"
    Mojtaba Tahani, Mojtaba Biglari, سعید جوان , Shiva Sabouri
    19th Annual Conference on Mechanical Engineering-ISME2011, 2011
46. "Simulation and technical comparison of different wind turbine power control systems"
    Mojtaba Tahani, Saeedeh Mirmahdiyan, Samira Memarian, Iman Rahbari
    World Renewable Energy Congress 2011 – Sweden, 2011
47. "Design of Darrius vertical axis wind turbine airfoil at low flow speeds using dual multiple flow tube model"
    [] [], Mojtaba Tahani, امین جوانمرد
    the 9th international conference on knowledge and technology of Mechanical, Electrical, and Computer of Iran, 2024
48. "Positioning of Electro Heating Elements Effects on the Heat Distribution Map on Iced Cylinder"
    Mojtaba Tahani, Seyyed Amir Mahdi Mirhosseini, sajjad sadeghi moghaddam
    22nd Iran International Aerospace Conference-AERO2024, 2024
49. "Investigating the performance of permanent magnet generators and charge controller amplification coefficients in different rpms"
    Mojtaba Tahani, Mehdi Rasooli, سعید حیدریان, [] []
    8th Iran Wind Energy Conference, 2022
50. "Optimization of Installation Location of Auxiliary blades in Horizontal Axis Wind Turbines"
    Mojtaba Tahani, Reza Nickkhah, Hjklkl Hgff, Mohammad Hosein Jafarzadeh
    IWEC2021, 2021
51. "Aerodynamic Performance Enhancement of Horizontal Axis Wind Turbine by studying on Parametric analysis of Biplane Effects"
    Mojtaba Tahani, Hjklkl Hgff, Mohammad Hosein Jafarzadeh, Reza Nickkhah
    IWEC2021, 2021
52. "Optimization of selection and evaluation of inverse pump performance for pressure regulation and power generation in water distribution network"
    Ali Kandi, مهدی مقیمی , Mojtaba Tahani
    Second National Conference on Water Management with a Waste Reduction and Recovery Approach, 2019
53. "Investigation of the Sonius Wind Turbine Wake by Dynamic Mode Decomposition"
    Mohamad Hossein Naderi, Mojtaba Tahani, Vahid Esfahanian
    FDC2019, 2019
54. "simulation and thermodynamic analysis of double effect litum boromide-water absobtion cooling system"
    Pedram Pourmonshi, Mojtaba Tahani, Armen Adamian
    Internationall conference on new research in engineering & technology, 2018
55. "Investigation of Absorption-Evaporation Combined Combined Cycle to Reduce the Heat Capacity of Generator and Pump Consumption Energy"
    Masoud Kazemi, Mojtaba Tahani, محمد افتخاری یزدی
    Second Conference on Knowledge and Technology of Electrical Engineering, Computer and Mechanics of Iran, 2018
56. "Thermodynamic modeling of absorption-recirculation combinational cycle"
    Masoud Kazemi, Mojtaba Tahani, محمد افتخاری یزدی
    3rd.International Conference on Researches in Science & Engineering, 2017
57. "Thermodynamic analysis of single-absorption refrigeration cycle of lithium bromide-water"
    Pedram Pourmonshi, Mojtaba Tahani, Armen Adamian
    56th international conference on sciences, engineering and technology innovations, 2017
58. "Factors affect the coefficient of performance in Absorption- Ejector Hybrid Refrigeration Cycle"
    Masoud Kazemi, Mojtaba Tahani, محمد افتخاری یزدی
    The First International Conference on New Achievements in Science and Engineering, 2017
59. "thermodynamic analysis of double-effect solar absorption cooling system"
    Pedram Pourmonshi, Mojtaba Tahani, Armen Adamian
    International Conference on knowledge and innovation in engineering, scince and technology, 2017
60. "Green Defense: Application of renewable energies in water storage tanks"
    Mojtaba Tahani, Narek Babayan, Roshanak Fahimi, Soheila Khosrojerdi, Soheil Roumi
    International Conference on Green Technology and Energy, 2017
61. "Aerodynamic Performance investigation of Horixontal Axis Wind Turbine using lifting line theory"
    Mojtaba Tahani, Mahsa Gholami, Mojtaba Mirhoseini, Mehran Masdari
    16 th international conference of Iranian Aerospace Society, 2017
62. "Aerodynamic analysis operation of the compressor with intermediate cooling"
    Mojtaba Tahani, Nazanin Ahmadi, Mirhamed Salehi
    Aero2017, 2017
63. "Aerodynamic Design of Horixontal Axis Wind Turbine"
    Mojtaba Tahani, Ghazaleh Kavari, Seyed Mojtaba Mirhoseini, Mehran Masdari, Hosein Soltanieh
    16 th international conference of Iranian Aerospace Society, 2017
64. "Construction and analysis of solar windward hybrid power generation system as a natural air conditioner"
    Ehsan Nouri, Mojtaba Tahani, محمد افتخاری یزدی
    The first national conference on sustainable green city, 2017
65. "Reverse pump design for use in water supply networks to generate power and reduce pressure"
    Mojtaba Tahani, Roshanak Fahimi, Hossein Yousefi Sahzabi, Younes Noorollahi
    Congress of Iranian Water and Wastewater Science and Engineering, 2017
66. "Performance prediction and modeling methods of indirect evaporative cooling and feasibility in Iran"
    Mojtaba Tahani, Amir Doodabinezhad, Hamed Kameli, Narek Babayan, Foroogh Mohandses Pour
    The third national conference on power industry and academia, 2016
67. "Comparison of heat exchanger and heat wheel performance based desiccant evaporative cooling system"
    Mojtaba Tahani, Farhad Yousef Tabrizi, Narek Babayan, سعید امانی , Arash Ghalami
    3rd national conference on power industry and academia, 2016
68. "Numerical modeling and parametric analysis of barriers vortex effect on convective heat transfer in a heat exchanger"
    محمد افتخاری یزدی , Mojtaba Tahani, Hamidreza Rahmani
    3rd National and First International Conference in applied research on Electrical, Mechanical and Mechatronics Engineering, 2016., 2016
69. "Numerical study of fluid flow and heat transfer of aluminum / aluminum nanofluids into parallel plates using barrier generators of vortex"
    محمد افتخاری یزدی , Mojtaba Tahani, Hamidreza Rahmani
    First International Conference on Mechanical Engineering and Aerospace Engineering, 2016
70. "Numerical study of the effect of angle and shape of vortex generator barriers on heat transfer displacement and loss of fluid pressure of water inside parallel plates"
    محمد افتخاری یزدی , Mojtaba Tahani, Hamidreza Rahmani
    First International Conference on Mechanical Engineering and Aerospace Engineering, 2016
71. "Different methods for solving Euler equations on the transition density based and supersonic flow"
    Mojtaba Tahani, Mohammad Salehifar, Arash Dartoomian, نیلوفر رفیعی, Mohamad Hojaji
    Aero2016, 2016
72. "58/5000 Numerical investigation of the influence of mechanical barrier on the thrust vector control performance"
    Mojtaba Tahani, Mohammad Salehifar, نیلوفر رفیعی, Mohamad Hojaji
    Aero2016, 2016
73. "The impact of high turbulence on the aerodynamic performance of the turbine section"
    Joseph Binabaji, Mojtaba Tahani, Mohamad Ahmady
    Aero2016, 2016
74. "Vertical Axis Wind Turbine Modeling Savynvsy output current drive capability of utilizing green building"
    Ali Rabbani, Mojtaba Tahani, Alibakhsh Kasaeian, Mehdi Mehrpooya
    Fifth International Conference on innovative approach in the Energy Conservation, 2016
75. "Numerical optimization of heat transfer of three-dimensional displacement of water fluid using barriers creating hexagonal and triangular vortices"
    محمد افتخاری یزدی , Mojtaba Tahani, Hamidreza Rahmani
    Third National Conference and First International Conference on Applied Research in Electrical Engineering, Mechanics and Mechatronics, 2016
76. "Turbulence models compairing with numerical study of a wind turbine blade airfoil"
    Mojtaba Tahani, Iman Gholami, Mohammad Ehyaee
    Conference in Modern advance in the energy sector, 2015
77. "Investigation of centrifugal pump impeller corrected geometry to improve energy consumption"
    Mojtaba Tahani, Farhad Nadjafi, Sepehr Govara, Majid Najafpour
    International Conference on IEA, 2015
78. "Turbulent flow structure analysis of turbine blade film cooling by proper orthogonal decomposition model"
    Mojtaba Tahani, Vahid Mahmoodi Joze, Vahid Esfahanian, Mohammad Jadidi
    16th Fluid Dynamic confrence, 2015
79. "Numerical study of the effect of orientation along the nose of the injector nozzle jet anti-sound on the supersonic flow"
    Mohamad Hojaji, Mojtaba Tahani, Arash Dartoomian, Mohammad Salehifar
    ISME2015, 2015
80. "Numerical investigation of Sonic Jet Injection effects from blunt nose on the turbulence supersonic flow"
    Mohamad Hojaji, Mojtaba Tahani, Arash Dartoomian, Mohammad Salehifar
    ISME2015, 2015
81. "Investigation of Secondary fluid injection thrust vector control efficiency on the supersonic nozzle"
    Mohamad Hojaji, Mojtaba Tahani, Mohammad Salehifar, Arash Dartoomian
    ISME2015, 2015
82. "Numerical modeling and parametric study of factors affecting a projectile aerodynamic coefficients a canard control"
    Mehran Masdari, Mojtaba Tahani, Mohsen Kazemi, Abas Sadri
    Aero2015, 2015
83. "The effect of time step of implicit algorithms for higher-order discrete Galerkin method"
    Vahid Badrkhani, Amir Nejat, Mojtaba Tahani
    Aero2015, 2015
84. "Optimization and calculation analysis of the separation of the boundary layer on the blade impeller centrifugal pumps to delay separation of the boundary layer and increase pump efficiency"
    Abolfazl Amiri, Mojtaba Tahani
    ETEC2015, 2015
85. "Comparision of Euler equation and Turbulence...."
    محمد حججی, Mojtaba Tahani, Mohammad Salehifar, Arash Dartoomian
    IRANAPA2014, 2014
86. "Numerical simulation of second jet injection for trust vector control"
    محمد حججی, Mojtaba Tahani, Mohammad Salehifar, Arash Dartoomian
    RANAPA2014, 2014
87. "Numerical simulation of jet injection tip of the nose flattened to reduce drag during the compressible Euler"
    Arash Dartoomian, Mohammad Salehifar, محمد حججی, Mojtaba Tahani
    ISMESTU2014, 2014
88. "Comparative analysis of two-dimensional and three-dimensional flow in a supersonic nozzle with hot gas injection thrust vector control"
    Mohammad Salehifar, Arash Dartoomian, محمد حججی, Mojtaba Tahani
    ISMESTU2014, 2014
89. "Gas turbine peromotion under the effect of evaporative cooling performance cycle gas compressor and gas turbine blade cooling"
    Mojtaba Tahani, Maryam Mirnaghi
    National conference on energy consuption optimization, 2014
90. "vibrational Simulation of offshore floating wind turbine"
    Mojtaba Tahani, Emad Ziaei, Pouria Servati
    National conference on energy consuption optimization, 2014
91. "increasing of hous wind turbine powers..."
    Mojtaba Tahani, Narek Babayan, Arman Pouaee, Mohsen Moradi
    National conference on energy consuption optimization, 2014
92. "Aerodynamic investigation High-Speed train for estimation the Drag force"
    Hooman Salavati, کیوان کرامتی, Mojtaba Tahani
    The 1st National Conference on High-Speed Railway in Iran, 2014
93. "Numerical investigation of winglet effect on the aerodynamic characteristics of WIG"
    Mojtaba Tahani, Ali Bargestan, Mohammad Hossein Sabour, Ali Gholami
    13th conference of Iranian Aerospace Society, 2014
94. "numerical investigation of winglet effects on the aerodynamic performance of wing in ground effect"
    Mojtaba Tahani, Ali Bargestan, Mohammad Hossein Sabour, Ali Gholami
    13th aerospace conference, 2014
95. "Numerical simulation of Influence of Forward-Facing Cavity on Aerodynamic Heating of Hypersonic Velocity"
    Mojtaba Tahani, Arash Dartoomian, Mohammad Salehifar
    National conference on Mechanical Engineering of Iran, 2014
96. "An inducer design algorithm and numerical investigation of a sample design with and without cavitation"
    محمدحسن شجاعی فرد, Hossein Akbarshahi, Mojtaba Tahani, Shahed Malekipoor
    5th conference on rotating equpment in oil & power industries, 2014
97. "Investigation of ejector-solar refrigeration cycle"
    Saeed Shamsodini, Saeed Farahat, Mojtaba Tahani
    2nd conference of new and clean energy, 2013
98. "Numerical study of three-dimensional flow field behind the flame holder - Guthrie with sinusoidal edge"
    Mehdi Soleimani, Mohammadsadegh Karimi, Iman Atai, Abbas Ebrahimi, Mojtaba Tahani
    Second National Conference on Gas Turbines, 2013
99. "Centrifugal oil pump hydraulic efficiency calculated using waste analysis methods and empirical test"
    محمدحسن شجاعی فرد, Behzad Salimiyan, Mojtaba Tahani
    20st Annual International Conference on Mechanical Engineering, 2013
100. "Evaluation of various turbulence models for numerical solution of flow around floating wing surface effect"
     Mohammad Hossein Sabour, Ali Bargestan, Mojtaba Tahani
     The 7th Students Conference on Mechanical Engineering, 2013
101. "Numerical Study of the vortices induced by the injection of supersonic flat-screen Jet Stream Approach for Large Eddy Simulation turbulence"
     Asghar Noor Mohammadi, Mohammad Hojaji, Mojtaba Tahani, Mohammad Hossein Sabour
     Twelfth Conference of Iranian Aerospace Society, 2013
102. "Effects of cavitation on the edge Hydrvfvyl Ayndyvsr dimensional time-independent mode"
     محمدحسن شجاعی فرد, Hossein Akbarshahi, Mojtaba Tahani
     Second National Conference on Mechanical Engineering, 2012
103. "Hydrvfvyl Ayndyvsr and numerical analysis in case of cavitation Ghyrkavytasyvny"
     محمدحسن شجاعی فرد, Hossein Akbarshahi, Mojtaba Tahani
     Second National Conference on Mechanical Engineering, 2012
104. "A new method for increasing the efficiency and reducing environmental pollution gas cycle"
     Mojtaba Tahani, Mohsen Ghazi, Motahare Khatami
     Eighth National Conference on Energy, 2012
105. "Design and numerical analysis of flow in the inlet air duct above the maximum sound pressure recovery"
     Reza Taghavi Zanooz, Mahmood Asgari Savadjani, Mojtaba Tahani
     The 10th Conference of Iranian Aerospace Society (AERO2011), 2011
106. "Torbopump induser design and evaluation of geometric parameters that affect its performance and hydraulic"
     Mohammad Hassan Shijaeefard, Hossein Akbarshahi, Mojtaba Tahani
     The 10th Conference of Iranian Aerospace Society (AERO2011), 2011
107. "Numerical simulation, design and optimization techniques in the case of radial turbulence"
     محمدحسن شجاعی فرد, Mojtaba Tahani, Gholamreza Hossinpoor, Mohammad Mehdi Ghanei
     The First Regional Conference of Mechanical Engineering, 2011