Conference Paper

1. "Predicting Long-Term Performance of Composite Pipes from Limited Experimental Data: An Industrial Solution"
   Roham Rafiee
   International Symposium on Case Studies in Advanced Engineering Design (CSIAED2025), 2025
2. "Reinforcement Efficiency of Carbon Nanotube: Probabilistic Study of Nanotube Waviness"
   Roham Rafiee
   28th International Conference on Composites Structures (ICCS28), 2025
3. "The Role of Applied R&D in The Industrial Production of Competitive Composite Pipes"
   Roham Rafiee
   International Conference and Exhibition on Reinforced Plastics (ICERP2025), 2025
4. "On the long-term behavior of composite pipes"
   Roham Rafiee
   The 9th International Conference on Composites: Characterization, Fabrication and Application (CCFA9), 2024
5. "Integrated Platform for Design, Analysis and Optimization of Composite Pipes"
   Roham Rafiee
   International Conference on Materials Physics and Composites (ICMPC 2024), 2024
6. "On the development of industrial-scale composite pipes"
   Roham Rafiee
   4th International Conference on Applied Mechanics and Mechanical Engineering (ICAMME), 2023
7. "Predicting mechanical properties of 3D-printed polymeric nanocomposites using stochastic modeling"
   Mohammad Reza Amini, Hadis Zehtabzadeh, Roham Rafiee
   26h International Conference on Composite Structures, 2023
8. "Predicting burst pressure of a Type III hydrogen pressure vessels using multi-scale modeling"
   Roham Rafiee, Amirhesam Salehi
   International Conference on Basic Sciences, Engineering and Technology, 2021
9. "On the Simulating CNT-Polymer Interaction Using Different Approaches"
   Roham Rafiee
   2nd Intl. Conference on Nanotechnology & Nanoscience, 2021
10. "Theoretical and experimental study of long-term creep in multilayered composites"
    Roham Rafiee, Amin Ghorbanhosseini
    Data Driven Computing and Machine Learning in Engineering, 2019
11. "Developing a Novel Formulation for Predicting Young's Modulus of CNT Reinforced Polymers Using Stochastic Multi-Scale Modeling"
    Roham Rafiee
    International Conference on Chemical Physics and Materials Science (ICCPMS19), 2019
12. "Predicting Young's modulus of graphene reinforced polymers"
    Roham Rafiee, Amirali Eskandriyun
    International Conference on Mechanics of Composites (MechComp2019), 2019
13. "Stochastic determination of failure in filament wound composite tubes"
    Roham Rafiee, Mohammadali Torabi
    International conference on mechanics of composites (MECHCOMP2019), 2019
14. "Predicting Young's modulus of aggregated nanoclay reinforced polymers"
    Roham Rafiee, Reza Shahzadi
    8th International Conference on Engineering Failure Analysis, 2018
15. "Evaluating the failure of composite pipes subjected to compressive transverse loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    8th International Conference on Engineering Failure Analysis, 2018
16. "Simulation of Split-disk Experiment for Determining Hoop Tensile Strength of FRP Pipes"
    Roham Rafiee
    12th International Conference on Advanced Computational Engineering and Experimenting, 2018
17. "Prediction of burst pressure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    12th International conference in Advanced Computational Engineering and Experimenting, 2018
18. "Estimating Young's modulus of Nanoclay Reinforced Polymers Using Stochastic Approach"
    Roham Rafiee, Reza Shahzadi
    12th international conference on Advanced Computational Engineering & Experimenting, 2018
19. "Mechanical performance of composite pipes under compressive transverse loading: Analytical and numerical approaches"
    Roham Rafiee, Mohammad Reza Habibagahi
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
20. "Comparing different approaches to simulate CNT and polymer interaction"
    Roham Rafiee, Amin Ghorbanhosseini, Mohammad Mahdavi
    20th International Conference on Composite Structures (ICCS20), 2017
21. "Predicting long-term hydrostatic pressure of GRP mortar pipes"
    Roham Rafiee, Behzad Mazhari
    20th International Conference on Composite Structures (ICCS20), 2017
22. "Stochastic determination of cnt coated fibers properties"
    Roham Rafiee, Amin Ghorbanhosseini
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
23. "Predicting mechanical properties of graphene sheets"
    Roham Rafiee, Amirali Eskandriyun
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
24. "On the strength of GRP pressure pipes with addition of sand filler"
    Roham Rafiee
    Advanced Computational Engineering and Experimenting (ACEX-2017), 2017
25. "The Influence of Vacancy Defects on The Young’s Modulus of Graphene Sheets"
    Roham Rafiee, Amirali Eskandariyun
    The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
26. "On the mechanical properties of CNT grown fibers"
    Roham Rafiee, Amin Ghorbanhosseini
    5th International Conference on Nanomaterials, Nanostructures and Nanoegnineering (ICNNN2016), 2016
27. "Modeling graphene sheets using nano-scale continuum mechanics approach"
    Roham Rafiee, Amirali Eskandariyun
    19th International Conference on Composite Structures (ICCS19), 2016
28. "Fatigue analysis of composite pipes using progressive damage modeling"
    Roham Rafiee, Fereshteh Eslami
    19th International Conference on Composite Structures (ICCS19), 2016
29. "ANALYZING STRUCTURAL BAHAVIOR OF A COMPOSITE WIND TURBINE BLADE USING SIMPLIMED MODELING"
    Roham Rafiee, Motahhare Khanpour
    40th Solid Mechanics Conference (SolMech2016), 2016
30. "Hierarchichal multi-scale modeling of CNT-coated fiber-reinforced laminates"
    Roham Rafiee, Amin Ghorbanhosseini
    40th Solid Mechanics Conference (SolMech2016), 2016
31. "Aeroelastic Instability Analysis of a Composite Wind Turbine Blade"
    Roham Rafiee, Mohsen Moradi
    18th International Conference on Composite Structures (ICCS18), 2015
32. "Predicting Mechanical Properties of Fuzzy Fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    18th International Conference on Composite Structures (ICCS18), 2015
33. "On The Long-term Behavior of Glass Fiber Reinforced Polyester Pipes"
    Roham Rafiee, Behzad Mazhari
    18th International Conference on Composite Structures, 2015
34. "A Method for Predicting Long Term Creep and Creep Failure in GRP Pipes"
    Roham Rafiee, Behzad Mazhari
    1st International Conference on Composite Pipes, Vessels & Tanks (CPVT), 2015
35. "Investigating inconsistencies of discontinuous filament winding process on functional failure pressures of GRP pipes"
    Roham Rafiee
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
36. "Predicting functional failure pressures in GRP and GRP Mortar pipes"
    Roham Rafiee, Hadi Hesamsadat
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
37. "Simulation of long-term behavior in composite pipes"
    Roham Rafiee, Behzad Mazhari
    The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
38. "Investigation of Functional Failure of Composite Pipes"
    Roham Rafiee, Hadi Hesamsadat
    first international conference on mechanics of composites, 2014
39. "A novel formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    first international conference on mechanics of composites, 2014
40. "Stochastic determination of functional failure pressures in FRP pipes"
    Roham Rafiee, Hadi Hesamsadat
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
41. "Predicting functional failure pressures in filament wound GRP mortar pipes"
    Roham Rafiee, Farshid Reshadi, Ali Amini
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
42. "On the meso-scale modeling of carbon nanotube reinforced polymer"
    Roham Rafiee, Vahid Firouzbakht
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
43. "Hoop tensile strength prediction of filament wound mortar pipes"
    Roham Rafiee
    ICCS17, 2013
44. "On the mechanical properties of defected graphene sheets and CNTs"
    Roham Rafiee, Reza Pourazizi
    ICCS17, 2013
45. "Evaluation of the electrical and electromagnetic properties of CNT-based composites"
    Roham Rafiee, Mohammad Hossein Sabour, Alireza Nikfarjam, Mostafa Taheri
    ICCS17, 2013
46. "Numerical Study of Heat Transfer for an External Natural Convection Using Cu/water and CuO/water"
    Alibakhsh Kasaeian, Shiva Nasiri, Sassan Mohaseb, Roham Rafiee
    The seventh MIT Conference on Computational Fluid and Solid Mechanics, 2013
47. "Failure analysis of GRP pipes under internal pressure"
    Roham Rafiee
    CCFA-3, 2012
48. "MULTI-SCALE MODELING OF IMPACT BEHAVIOR OF CARBON NANOTUBE REINFORCED POLYMER"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering (ICCE-20, 2012
49. "NUMERICAL MODAL ANALYSIS OF AN EMBEDDED CARBON NANOTUBE IN A POLYMER MATRIX"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering, 2012
50. "INVESTIGATION OF STRAIN ENERGY RELEASE RATE IN CARBON NANOTUBE-BASED COMPOSIETS"
    Roham Rafiee, Seyed Meghdad Heydarhaie
    Mechanics of Nano Micro and Macro Composite Structures, 2012
51. "ON THE REINFORCEMENT EFFICIENCY OF WAVY CARBON NANOTUBES"
    Roham Rafiee
    Mechanics of Nano Micro and Macro Composite Structures, 2012
52. "Progressive failure analysis of GRP pipes: Modeling and experimental evaluation"
    Roham Rafiee
    The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012, 2012
53. "Youngs Modulus Prediction of Carbon Nanotubes Using Full Nonlinear Interatomic Potentials"
    Roham Rafiee, Meghdad Heydarhaei
    16th International Conference on Composite Structures (ICCS16, 2011
54. "Development of a stochastic simulation to predict elastic properties of carbon nanotube reinforced composites"
    Mahmood M. Shokrieh, Roham Rafiee
    International Conference on Composite Structure (ICCS16, 2011
55. "Stress analysis of composite cylinders under external pressure"
    Roham Rafiee, پریوش رضازاده
    The 4th Conference on Application of Composites in Iran Industries, 2025
56. "Investigating mechanical behavior of composite pipes and verssels under internal pressure using analytical and numerical methods"
    Roham Rafiee, علی شاهچراغی
    The 4th Conference on Application of Composites in Iran Industries, 2025
57. "Experimental investigation and prediction of strength of 3D-printed nanocomposite specimens"
    Roham Rafiee, هیراد عموحاجی
    The 4th Conference on Application of Composites in Iran Industries, 2025
58. "Calculating Dynamic Fracture toughness of polymers and polymeric nanocomposites under various strain rates"
    Reza Yazdanparast, Roham Rafiee
    22nd International Conference of Iranian Aerospace Society, 2024
59. "A rate dependent nonlinear VE-VP material model for Epon-828 epoxy resin"
    Reza Yazdanparast, Roham Rafiee
    7th national conference on Mech. and Aerospace Eng., 2023
60. "Experimental and theoretical investigations of water absorption in composite pipes under transverse loading"
    Mohammad Naghi Arabian, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
61. "Predicting creep behavior of shor-fiber composites using laminate analogy"
    Ali Ghamarzadeh, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
62. "On the effects of UV rays of sunlight on the mechanical properties of polymeric composites"
    Roham Rafiee, Amir Hossein Rahimi
    3rd national conference on applications of composites in Iran industries, 2023
63. "Investigating the influence of fiber winding pattern on the burst pressure of Type-III composite pressure vessels"
    Roham Rafiee, [] []
    Int. Conf. on Aerospace, 2022
64. "Developing an optimization procedure of Composite pipes utilized in oil and gas network"
    Roham Rafiee, حسین اسپرسپ
    Int. Conf. of Mech. Eng., 2022
65. "Reliability analysis of a composite pressure vessel"
    Sahar Bazargani, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
66. "Bending analysis of composite gratings using analytical and numerical modeling methods"
    رضا یزدان پرست, Amin Ghorbanhosseini, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
67. "Comparison study on first-ply-failure in composite pressure vessels considering winding pattern"
    Amirhesam Salehi, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
68. "Experimental analysis of creep in a composite pipe under transverse loading"
    Amin Ghorbanhosseini, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
69. "A new fracture criterion for cracked orthotropic parts under mixed mode I / II loading based on equivalent reinforced isotropic model"
    Mehdi Fakoorsaghieh, Roham Rafiee, Shahab Zare hosseinabadi
    ISME2017, 2017
70. "Quality Control Process of Composite Pipes: From raw materials to final products"
    Roham Rafiee, Reza Shahzadi
    Application of Composites in Iran Industries, 2017
71. "Simulation of ring stiffness test on GRP pipes using finite element method"
    Roham Rafiee, Mohammadreza Habibagahi
    Application of Composites in Iran Industries, 2017
72. "Comparative study on prediction of the first ply failure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    Application of Composites in Iran Industries, 2017
73. "Challenges and Applications of Nanocomposites in Various Industries"
    Roham Rafiee, Parsa Sharifi, Amirali Eskandariyun
    Application of Composites in Iran Industries, 2017
74. "Predicting mechanical properties of CNT-based nanocomposites using irregular tessellation technique"
    Roham Rafiee, Vahid Firouzbakht
    ISME2016, 2016
75. "Stochastic analysis of Young's modulus of non-defected and defected CNTs using molecular dynamics"
    Roham Rafiee, Mohammad Mahdavi
    14th Conference of Iranian Aerospace Society, 2015
76. "Comparative study on creep modeling methods of polymeric composites"
    Roham Rafiee, Behzad Mazhari
    ISME2014, 2014
77. "The influence of functionalization on the mechanical properties of CNT-based composites"
    Roham Rafiee, Reza Pourazizi
    13th conference of Iranian Aerospace Society, 2014
78. "Developing a formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    13th conference of Iranian Aerospace Society, 2014
79. "Stochastic determination of failure pressure in composite pressure vessels"
    Roham Rafiee, Hadi Hesamsadat
    The 13th Conference of Iranian Aerospace Society (AERO2014), 2014
80. "Investigation of electrical and electromagnetic properties of CNT-based nanocomposites using in-situ polymerization"
    Roham Rafiee, Alireza Nikfarjam, محمد حسین صبور, مصطفی طاهری
    Aero2013, 2013
81. "Impact analysis of nanocomposites reinforced by CNT using multi-scale finite element method"
    Roham Rafiee, Reza Maleki Moghadam
    ICMEAT2012, 2012
82. "Hoop Tensile Strength Prediction of Glass Fiber Reinforced Polymer Pipes"
    Roham Rafiee
    IranPipeTech2012, 2012
83. "Modal analysis of carbon nanotube based composites using multi-scale finite element modeling"
    Roham Rafiee, Reza Maleki Moghadam
    Aero2012, 2012
84. "Extracting optimum thickness of composite layers to rehabilitate corroded buried steel gas pipe"
    Roham Rafiee
    IranPipeTech2011, 2011
85. "Investigation of CNT diameter and chirality effect on Young's modulus using non-linear finite element model"
    Roham Rafiee, Seyed Meghdad Heydarhaie, Abdolhossain Fereydon
    ISME2011, 2011